\documentclass[twocolumn]{ijns}
\usepackage{graphicx,epsfig,color}
\usepackage[normal]{subfigure}
\usepackage{amsmath,amsthm,amssymb}
\usepackage{floatflt}  %加這行就可以使用文繞圖
\usepackage{setspace}
\usepackage{rotating,algorithm,algorithmic}

%\renewcommand{\algorithmicrequire}{\textbf{Input:}}
%\renewcommand{\algorithmicensure}{\textbf{Output:}}


\pagestyle{headings}
%%%%%
\setcounter{page}{1}
\def\markboth#1#2{\def\leftmark{#1}\def\rightmark{#2}}
\def\footernote#1{\markboth{#1}{#1}}

\newtheorem{definition}{Definition}
\newtheorem{theorem}{Theorem}
\newtheorem{lemma}{Lemma}
\newtheorem{corollary}{Corollary}
\newtheorem{example}{Example}



\setlength{\textheight}{24.5cm} \setlength{\columnsep}{0.7pc}
\setlength{\textwidth}{7.0in} \setlength{\topmargin}{-0.7in}
\setlength{\oddsidemargin}{-0.34in} \setlength{\parindent}{1pc}

%%%%%
\markright{head} \markboth{}{International Journal of Network
Security, Vol.0, No.0, PP.1, %Jan. 2006
%\MakeLowercase{(http://isrc.nchu.edu.tw/ijns/)}
{\color{red} - Submission}} %
%{\color{red} - Galley Proof}} %

%\markboth{International Journal of Network Security, Vol.1, No.1,
%pp. 1-6,~2005 \MakeLowercase{\large (http://isrc.nchu.edu.tw/ijns/)}}{}

%%%%%
\title{\huge\bf Paper Title}
\author{First Author Full Name$^1$, Second Author Full Name$^2$, and Last Author Full Name$^3$\\
\medskip {\small\it(Corresponding author: Full Name)}~\\
{\normalsize The Department \& Institute of the First Author$^1$}\\
{\normalsize The Detailed Postal Address of the First Author}\\
{\normalsize The Department \& Institute of the Second Author$^2$}\\
{\normalsize The Detailed Postal Address of the Second Author}\\
{\normalsize The Department \& Institute of the Third Author$^3$}\\
{\normalsize The Detailed Postal Address of the Third Author}\\
{\normalsize (Email: corresponding\_authors@email.address)}\\
{\normalsize\it (Received Apr. 20, 2012; revised and accepted July 5, 2012) }
}

\date
\newpage
\begin{document}
%\setlength{\baselineskip}{24pt}
\maketitle
\thispagestyle{headings}
\begin{abstract}
Abstract needs to be written to focus on: Purpose,
Design/methodology/approach, Results, and Originality/Values if
any. It is required by the IJNS to have around 100 to 150 words.
\vspace*{0.1cm}
~\\
{\it Keywords: Keywords are Listed in Order by Alphabet; List 3-5
Keywords; The Last Keyword}
\end{abstract}

\section{Introduction}
The introduction section needs to be rewritten with much better
motivating and providing the context for this work. It should
include:
\begin{enumerate}
\item Contextualization;
\item Importance/Relevance of the Theme;
\item Research Question;
\item Objectives;
\item Limitations of the paper;
\item Structure of the Paper.
\end{enumerate}

All references in your paper need to be
cited~\cite{wha1998km,Wu2008mc}. You are asked to provide a .bib
file. The format of .bib is shown in ijns.bib~\cite{Hwang2011bk}.

\section{The Second Section}
The first alphabet of each word in the title of each section must
be Capital Letter.

\subsection{The Figure Format}
You have two ways to produce figures:
\begin{description}
\item[Figure 1.] You can draw it using Latex syntax.
Figure~\ref{f01} is an example.

\begin{figure}
\begin{center}
  \includegraphics[scale=0.45]{fig01.eps}
  \caption{The proposed scheme}
  \label{f01}
\end{center}
\end{figure}



\item[Figure 2.] The other way is to include the eps file as shown
in Figure~\ref{f02}. In this case, you need to provide all eps
files to us.
\end{description}

\begin{figure*}[!hbpt]
\begin{center}
\setlength{\unitlength}{12.0mm}
\begin{picture}(5.5, 3.5)
\put(0, -0.2){\framebox(5.5, 3.2)[t]{}} \put(2.5,
1.0){\circle{3.0}} \put(2.0, 1.5){\circle{1.5}} \put(3.0,
2.0){\circle{4.0}} \put(2.57, 1.57){\circle*{0.2}} \put(2.65,
1.65){$S_1$} \put(2.5, 0.1){$C_1$} \put(1.5, 2.2){$C_1'$}
\put(3.6, 2.0){$C_1^{"}$}
\end{picture}
\caption{Hwang's scheme} \label{f02}
\end{center}
\end{figure*}

\subsection{The Equation Format}
Number equations consecutively. Equation numbers, within parentheses,
are to position flush right, as in (1), using a right tab stop.
To make your equations more compact, you may use the solidus ( / ), the exp function,
or appropriate exponents. Italicize Roman symbols for quantities and variables,
but not Greek symbols. Use a long dash rather than a hyphen for a minus sign.
Punctuate equations with commas or periods when they are part of a sentence, as in Equation~(\ref{eq01}):
\begin{eqnarray}\label{eq01}
  \alpha + \beta = \gamma.
\end{eqnarray}

Note that the equation is centered using a center tab stop. Be
sure that the symbols in your equation have been defined before or
immediately following the equation. Use "Equation~(\ref{eq01})",
not "Equations~(\ref{eq01})" or "(\ref{eq01})".

The following is an example of matrix equation:
\begin{eqnarray*}
 \left[ \begin{array}{cccc}
          1 & x_1 & \cdots & x_1^{n-1} \\
          1 & x_2 & \cdots & x_2^{n-1} \\
          \cdots &  \cdots & \cdots & \cdots \\
          1 & x_n & \cdots & x_n^{n-1}
        \end{array}
 \right]
 \left[ \begin{array}{c}
          A_1 \\
          A_2 \\
          \cdots \\
          A_n
        \end{array}
 \right]
 =
 \left[ \begin{array}{c}
          Fullpath_1 \\
          Fullpath_2 \\
          \cdots \\
          Fullpath_n
        \end{array}
 \right]
\end{eqnarray*}

Since the above equation does not be cited in this paper, you need not to give the equation number
in the above equation. The following is the other equation example which give equation number~Equation~(\ref{eq02}):
\begin{eqnarray}
b_i &=& \left\{%
\begin{array}{ll}
    1~\mathrm{if}~x_{2i-1} = 0 \mathrm{~and}~\\
        \hspace*{1cm} (x_2i = 1~\mathrm{or}~x_{2i+1} = 1)\label{eq02} \\
    0~\mathrm{otherwise}
\end{array}
\right\}
\end{eqnarray}


\subsection{The Table Format}
The following is an example of one-column Table~\ref{t01}:
\begin{table}[!hbpt]
\caption{Typical states of SEIR model} \label{t01}
\begin{center}
\begin{tabular}{|c|l|} \hline\hline
  S  & Susceptible \\ \hline
  E  & Exposed to Infection\\ \hline
  I  & Infected \\ \hline
  R  & Removed \\ \hline\hline
\end{tabular}
\end{center}
\end{table}

The following is an example of two-column Table~\ref{t02}:
\begin{table*}[!hbpt]
\caption{To-be tested audio files} \label{t02}
\begin{center}
\begin{tabular}{|l|l|l|l|} \hline\hline
  {\bf File name}  & {\bf Sampling Rate} & {\bf Length} & {\bf Properties} \\ \hline
  {\em march.wav}  & 8 and 44.1 (kHz)    & 56 (Sec)      & Composition of both low-frequency and high-frequency\\ \hline
  {\em drum.wav}   & 8 and 44.1 (kHz)    & 56 (Sec)      & Mainly composed of low- frequency\\ \hline
  {\em flute.wav}  & 8 and 44.1 (kHz)    & 56 (Sec)      & Well-proportioned frequency distribution\\ \hline
  {\em dialog.wav} & 8 and 44.1 (kHz)    & 56 (Sec)      & Daily dialog\\  \hline
\end{tabular}
\end{center}
\end{table*}



\subsection{The Algorithm Format}
The following is an example of Algorithm format~(Algorithm~\ref{al01}):

\begin{algorithm}[h!]
\begin{algorithmic}[1]
\STATE Begin
\STATE Initialize the {\em observations storage.}
\STATE Send service request to the SCA.
\WHILE {Not end of user session}
  \STATE Accept transaction data T.
  \STATE Belief B $\Leftarrow$ Call {\em Belief Formulator(T).}
  \STATE Send B and T to the SCA. \
  \IF {There is any request for observations from the SCA}
    \STATE Retrieve observations from the {\em Observation Storage.}
    \STATE Send observations to the SCA.
  \ENDIF
  \STATE Periodically refresh the {\em observations storage}
\ENDWHILE
\STATE End
\end{algorithmic}
\caption{Working of the MCA} \label{al01}
\end{algorithm}

\subsection{The Reference Format}
All references should be archived material such as journal
articles, books, and conference proceedings. Web pages should not
be referenced, since their content and accessibility may change
over time. Personal communications and unpublished data are not
acceptable references. The references published in Chinese must be
translated into English and noted by  ``(in Chinese)".


\section{Conclusions}
The last section needs to be expanded to focus on "Discussion, Implication, and Conclusion" to include:
\begin{itemize}
\item Discussion, Implication, and Conclusion;
\item Conclusions;
\item Future Studies and Recommendations.
\end{itemize}


\section*{Acknowledgments}
This study was supported by the National Science Council of Taiwan under grant NSC 95-2416-H-159-003. The
authors gratefully acknowledge the anonymous reviewers
for their valuable comments.


\addcontentsline{toc}{chapter}{\protect\numberline{}{REFERENCES}}
\bibliography{ijns}
\bibliographystyle{IJplain}


%\newpage
\section*{Biography}
\noindent {\bf The First Author} biography.
It is required by the IJNS to have maximal 300 words.\vspace*{0.2cm}\\
%
\noindent {\bf The Second Author} biography. It is required by the
IJNS to have maximal 300 words.\vspace*{0.2cm}\\
%
\noindent {\bf The Last Author} biography.
It is required by the IJNS to have maximal 300 words.
\end{document}
